Genset Controller >> Synchronising and Load Sharing
Trans-AMF SYNCRO
Information
Automatic Gen-Set Controller with Transfer Switching & Load Sharing
Mains voltages and frequency measurements Generator voltages and frequency measurements Peak lopping (mains or genset) Power export to mains Mains de-coupling protection with R.O.C.O.F and vector shift methods Manual voltage/frequency adjustment Direct/Reverse Governor and AVR control Auto adjust feature for Governor and AVR Volts, frequency and phase matching Synchroscope display Logic Controller functionality for PLC
Specifications :
| Communication interface | USB programming and communication port, Ethernet, RS485 |
| Inputs | 13x Configurable digital, 5x Analogue senders, Magnetic Pickup, Charge Alternator D+(WL) inputs |
| Outputs | Configurable 2x Relays, 7x Transistors, GBR outputs |
| Current Measurement | 3 phases CT inputs for Load Current, 1x CT input for Earth Current |
| Voltage Measurement | 3 phases for Alternator |
| Power Factor Measurement | For 3 phases |
Case :
| Dimensions | 276mm x 189mm x 45mm |
| Panel Cut-Out | 223mm x 162mm |
| Protection | IP65 at front side |
| Weight | Approximately 0,82Kg |
Ratings :
| DC Battery Supply range | 8 to 32Vdc, max.operating current is 860mA |
| CT Secondary | 5A |
| Sender Measurement | 0 to 1300 ohm, accuracy: 1%FS, resolution: 1 ohm |
| Cabin. Temp. Measuremet | -50 to +100 ºC, accuracy: 1 % FS, resolution: 1 ºC. |
| Operating / Storage Temp. | -20°C to +70°C / -30°C to +80°C |