Genset Controller >> Synchronising and Load Sharing
Trans-MAINS
Information
Automatic Transfer & Load Share Unit With Mains
Load sharing with genset (up to 32 gensets) Busbar voltages and frequency measurements Bus failure detection Peak lopping (mains or genset) Power export to mains Mains de-coupling protection with R.O.C.O.F and vector shift methods Volts, frequency and phase matching Synchroscope display Logic Controller functionality for PLC
Specifications :
| Communication interface | USB programming and communication port, CanOpen, Ethernet, RS485. |
| Inputs | 13x Configurable digital |
| Outputs | Configurable 9x Transistors, GBR outputs |
| Current Measurement | 3 phases CT inputs for Load Current, 1x CT input for Earth Current |
| Voltage Measurement | 3 phases for Alternator |
| Power Factor Measurement | For 3 phases |
Case :
| Dimensions | 276mm x 189mm x 45mm |
| Panel Cut-Out | 223mm x 162mm |
| Protection | IP65 at front side |
| Weight | Approximately 0,82Kg |
Ratings :
| DC Battery Supply range | 8 to 32Vdc, max.operating current is 860mA |
| CT Secondary | 5A |
| Sender Measurement | 0 to 1300 ohm, accuracy: 1%FS, resolution: 1 ohm |
| Cabin. Temp. Measuremet | -50 to +100 ºC, accuracy: 1 % FS, resolution: 1 ºC. |
| Operating / Storage Temp. | -20°C to +70°C / -30°C to +80°C |